..as you can tell from todays post, it was an ordeal getting the winch clear, every bolt on the framework, and the cast gearbox guard was cut off, followed by a LARGE Ball Peen Hammer and punch to drift out the stub.
…I will have Popeye Arms before I know it !
anyway, its off, and the rad is out ! , you can see from the rad picture, the tunnel that the winch drive shaft passes through, as well as the sloped armour that it also goes through
Ive added a pic of the hard to find rad shroud, and will post more of the rad and parts as i pull it apart for pressure testing
happy Friday !