….yes, that well worn phrase, but for us, it means the final empty out of the hanger, storing all the loose “extras” that pile up over...

so, with the M3 reduced to a roller chassis ( we know this , as we had to move it today to take delivery of a BFAC (Big F…Air Compressor!...

All the brake lines are off the hull, and we have left the flex lines on the front axel, as we will be doing that as a separate system...

The strategy the Society uses when performing major restorations is to strip a hull, or take it down to a frame, removing major...

Our V-100 enjoying the sunshine

the cab and panel is built much the same was as the rest of the hull, basically sandwich layers of steel bolted together. I’m sure it was...

now that we have the M3 down to a “roller”, we are back on the cab we placed aside earlier in the fall. The cold weather seems to have us...

Trailer hitch spring compensator,

Like dropping your cel phone in water, dropping your digital camera in “liquid” can be equally as distressing, and we are happy to...

moving now to stripping under the floor of the rear hull, we are very pleased to see that we can salvage 100″ of the original brake...

Nice to have the sponson and rear hull floor structure off. Its been slow going …I shouldn’t have bragged about the lack of rust on...

…we were there supporting our local Community and Legion , as well, as acting as a road block in case we had a driver not respecting the...

Well, its starting to get cold, so we are organizing the hangar so the bulk of the fleet can hibernate, in the cold pale blue light of a...

getting back on track here slowly, but its been a busy week. Many roads here are still out of use, and my own commute has grown from 30...

wow, we got hit hard here. West Quebec, where we have our shop spaces has taken a full on hit by mother nature. Last count we have 127...

….but I’m at our admin offices tomorrow, and not much to shoot ‘cept paperwork (although…we do have our Sugga and Ferret down there still !)

we are doing a full “nut and bolt”, so ifs its not riveted on, its coming off the frame, the pile of brackets and fittings is getting...

we have the booster off as well as the master, these are being set out to a local shop, Malmberg Truck Center, here in Ottawa, as they...

The trans has an inch of grease stuck on it, so it had to be cleaned just to find the Bell Housing Bolts, which, thankfully came out easy...

We were very pleased to be one of the many dedicated sponsors for this highly successful event that sees citizens and veterans paired up...